Stratasys SAF technology transforms 3D printing with its innovation, making it easy to create high-quality, durable plastic parts in any quantity. It uses smart powder management and targeted heating for better strength, catering to businesses large and small. Suited to a wide range of industries and applications, SAF offers the scalability, flexibility and responsiveness needed to meet today’s — and tomorrow’s — manufacturing challenges.
SAF technology revolutionizes 3D printing by deploying industrial-grade print heads to precisely apply a fusing fluid on a powder bed. Using an infrared lamp to selectively fuse particles layer by layer, the fluid enhances heat absorption of the powder particles to form solid objects. This method supports high-volume production of complex shapes, rendering an efficient and cost-effective way to manufacture end-use parts, without the constraints of traditional manufacturing processes.
Stratasys SAF HighDef brings 3D printed objects to life with enhanced aesthetics and surface appearance. Experience sharper, clearer prints with an unmatched level of detail available today in area-wide power bed technologies.
This innovative SAF firmware upgrade enables users of the H350 to achieve the industry-leading narrowest gap clearance within the area-wide powder bed fusion sector. This refers to the smallest possible spacing on surfaces that prevents them from fusing together, thus ensuring precise and tight fits in mechanisms and assemblies.
The high production capacity, part consistency and resulting lower cost per part make SAF technology a superior choice for part production in high-mix, higher-volume industries like automotive and general manufacturing.
Enhances machinery reliability with precise, durable components; streamlines production with rapid prototyping and manufacturing.
Applications: Bearing cages, filter and electronics housings, flanges, caps/lids, hinge covers, impellers, brackets, EOAT, grippers.
Offers customization and innovation in products; enables rapid market introduction of high-quality, tailored sport and consumer items.
Applications: Sporting equipment, glasses, helmet, clips, saddles, eyewear, consumer electronics
Enables lightweight, high-strength component manufacturing; optimizes designs for fuel efficiency and payload capacity in aerospace applications.
Applications: Drones and parts, brackets, wiring holders, small ducting, small seats components
Applications: Sensor housings, HVAC grills, vents, ducts, cup holders, cable clips, covers, wire harnesses, fixtures, jigs
Applications: Bearing cages, filter and electronics housings, flanges, caps/lids, hinge covers, impellers, brackets, EOAT, grippers.
Applications: Sporting equipment, glasses, helmet, clips, saddles, eyewear, consumer electronics
Applications: Customized insoles, prosthetics, baby helmet, ankle foot orthotics, splints, etc
Applications: Drones and parts, brackets, wiring holders, small ducting, small seats components
Although designed for volume-quantity production, SAF technology’s speed and capacity for intricate details is equally capable of rapid prototyping and tooling applications.
The H350 printer with SAF technology offers a generous build volume that accommodates high-volume production.
The H350 printer with SAF technology offers a generous build volume that accommodates high-volume production.
Reduce the weight and cost of robotic end-of-arm tools by 3D printing them with SAF technology.
Maximize your production with Stratasys' SAF™ technology. Whether for high-capacity printing or efficient powder handling, our solutions offer the scalability and control to enhance your additive manufacturing workflow.
Grow your business with the H350’s cost-efficient, higher-volume additive manufacturing production.
The H350 printer leverages multiple features to provide benefits over competing powder bed systems. Fewer consumables lowers your operational costs which ultimately reduces the cost per part. The higher nesting density compared to other solutions increases productivity and also helps lower per-part cost. Regardless of application, the H350 takes additive manufacturing to new levels of production.
Learn MoreAutomated powder management for streamlined efficiency.
The PowderEase T1 is a 3-in-1 solution that automates powder breakout, retrieval, and dosing, reducing manual handling and increasing production uptime. Designed to support multiple H350 printers, the T1 minimizes powder waste, ensures accurate dosing, and enables a cleaner, more controlled workflow, saving up to 50 minutes per build cycle compared to manual processes.
Learn MoreGrow your business with the H350’s cost-efficient, higher-volume additive manufacturing production.
The H350 printer leverages multiple features to provide benefits over competing powder bed systems. Fewer consumables lowers your operational costs which ultimately reduces the cost per part. The higher nesting density compared to other solutions increases productivity and also helps lower per-part cost. Regardless of application, the H350 takes additive manufacturing to new levels of production.
Automated powder management for streamlined efficiency.
The PowderEase T1 is a 3-in-1 solution that automates powder breakout, retrieval, and dosing, reducing manual handling and increasing production uptime. Designed to support multiple H350 printers, the T1 minimizes powder waste, ensures accurate dosing, and enables a cleaner, more controlled workflow, saving up to 50 minutes per build cycle compared to manual processes.
SAF technology powder-based polymers deliver the material properties needed for volume production of plastic parts including high impact resistance, ductility, low moisture absorption and thermal stability.
100% bio-sourced material made from Castor oil. Stratasys High Yield PA11 parts have great mechanical performance and are ideal for applications requiring improved impact and fatigue resistance.
The most accurate, lowest cost and good all-round mechanical performance making SAF PA12 the most requested and versatile polymer in powder bed fusion.
The SAF PP is the first real polypropylene additive manufacturing solution in PBF: Superior aesthetics, best accuracy, fastest, most cost-effective, for chemically resistant and airtight applications.
100% bio-sourced material made from Castor oil. Stratasys High Yield PA11 parts have great mechanical performance and are ideal for applications requiring improved impact and fatigue resistance.
The most accurate, lowest cost and good all-round mechanical performance making SAF PA12 the most requested and versatile polymer in powder bed fusion.
The SAF PP is the first real polypropylene additive manufacturing solution in PBF: Superior aesthetics, best accuracy, fastest, most cost-effective, for chemically resistant and airtight applications.
A sustainable and cost-effective solution, SAF ReLife™ PA12 allows for the reuse of PA12 powder waste from other PBF technologies, delivering high-quality parts with minimal material costs and up to 90% lower carbon footprint impact.
Watch the below videos to learn how SAF™ 3D printer technology allows you to streamline and scale workflow with consistent part production using best-in-class ternaml control during the build process.
Watch SAF PP parts withstand high-pressure testing, proving leak-proof performance with just a 1 mm wall thickness. Reliable, precise, and consistent.
Load 40 kg of powder for two full prints without refilling. Ensure clean, efficient, and lights-out production with Stratasys' seamless powder management system. Watch now!
Two H350 printers and an unpacking station fit in 4.6x4.7m, cutting space and HVAC needs. Maximize your production environment with Stratasys. Watch now!
See how Stratasys SAF PA12 delivers precise tolerances for consistent, high-quality parts across builds and machines. Discover new standards in accuracy and reliability.
Struggling with part quality in mixed builds? Discover how Stratasys SAF technology's thermal control balances bulky and delicate parts, ensuring superior quality for all. Watch now!
Discover Stratasys' rigorous testing process for SAF materials. Over 20,000 tests ensure top performance. Watch now to see why Stratasys stands out.
Discover how SAF™ technology enables high-volume production of complex connectors with precise tolerances. Achieve 342 parts per build. Watch now!
Eliminate Stair-Stepping in Your 3D Prints with GrabCAD Print Pro's Preview Layer Lines feature.
The SAF H350 is capable of producing high nesting builds of above 40% without any quality issues and keeping a soft and easy unpack.
See how SAF™ PP delivers unmatched strength and versatility in 3D printed polypropylene parts. Discover efficient production and superior quality.
Watch SAF PP parts withstand high-pressure testing, proving leak-proof performance with just a 1 mm wall thickness. Reliable, precise, and consistent.
Load 40 kg of powder for two full prints without refilling. Ensure clean, efficient, and lights-out production with Stratasys' seamless powder management system. Watch now!
Two H350 printers and an unpacking station fit in 4.6x4.7m, cutting space and HVAC needs. Maximize your production environment with Stratasys. Watch now!
See how Stratasys SAF PA12 delivers precise tolerances for consistent, high-quality parts across builds and machines. Discover new standards in accuracy and reliability.
Struggling with part quality in mixed builds? Discover how Stratasys SAF technology's thermal control balances bulky and delicate parts, ensuring superior quality for all. Watch now!
Discover Stratasys' rigorous testing process for SAF materials. Over 20,000 tests ensure top performance. Watch now to see why Stratasys stands out.
Discover how SAF™ technology enables high-volume production of complex connectors with precise tolerances. Achieve 342 parts per build. Watch now!
Eliminate Stair-Stepping in Your 3D Prints with GrabCAD Print Pro's Preview Layer Lines feature.
The SAF H350 is capable of producing high nesting builds of above 40% without any quality issues and keeping a soft and easy unpack.
See how SAF™ PP delivers unmatched strength and versatility in 3D printed polypropylene parts. Discover efficient production and superior quality.
GrabCAD Print software is what makes Stratasys 3D printers go, providing the features and flexibility to make 3D printing easy and understandable. At its core, GrabCAD Print software removes the friction of going from a CAD model to a physical 3D printed part and speeds up the process. You designed the part, now let GrabCAD Print software do the rest to make it a reality.
Stratasys Direct delivers durable plastic parts with exceptional quality and speed. With a fleet of Stratasys’ SAF H350 printers, Stratasys Direct tackles initial prototypes and high-volume production with ease. Take advantage of our expertise, certifications, in-house printing, finishing, assembly, and quality control.
Get high-quality parts fast from the original AM pioneers – Stratasys Direct.
Learn what 3D printing is all about in this introductory e-learning module.
Explore e-learning modules that cover the basics of getting familiar with the H350 printer.
Explore e-learning modules that cover the basics of getting familiar with the H350 printer.
These e-learning modules will help you understand how to use and work with the H350 printer.
The H350 3D printer produces accurate, precise and strong but lightweight EOAT parts.
The H350 3D printer utilizes SAF technology to produce consistent and accurate end-use parts for the automotive industry.
The H350 3D printer utilizes SAF technology to produce consistent and accurate end-use parts for the automotive industry.
Download a look book that showcases the automotive production-grade parts the H350 3D printer with SAF technology can print.